 |
There is a hopper filled with seeds and mounted on the cylindrical wooden roller assembly. Sides are packed to avoid spillage. |
|
Holes are drilled on the surface of the wooden Roller along the width wise at one point (5 holes drilled equally spaced at 100mm gap). |
|
Seeds will fall over the wooden Roller. Seed will be collected at the drilled holes, when the hole was at upward direction. When the roller tends to rotate the |
|
seed will fall down when the hole is towards downward direction. (Collection and transfer of the seeds takes place by the rotary movement of the wooden roller.) |
|
There will be 5 flexible Hoses connected at the falling Point. Seeds will be received by the hoses and transferred to the ground. (Seeding takes Place.) |
|
Plough set up Installed in the device. |
|
Front Plough to dig the soil and back plough to cover with soil after seeding takes place. |
|
Plough depth designed with 150 mm approximately. (This prevents harms to the micro organisms in the soil. If we dig more depth it will affect earthworms & microorganism in the soil). |
